Lutron PD-FSQN Caseta Wireless Smart Fan Speed Control

cULus Listed
NOM Certified
FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
Industry Canada Certified
IFTEL Certified
NEMA 410 (-5ANS, -6ANS, -5WS, -10NXD, -5NE)

Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
Load controls always operate locally and do not require system control
Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-10NXD use conventional 3-way wiring.
Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately
Lutron Claro wallplates snap on with no visible means of attachment
Requires a 1-gang U.S. wallbox. 31⁄2 in (89 mm) depth recommended, 21⁄4 in (57 mm) depth minimum
Green status LED(s) to indicate load status
PD-FSQN provides 4 quiet fan speeds plus OFF for a single ceiling fan

Caseta Wireless in-wall switches, dimmers, and fan controls communicate with Pico remote controls and the Lutron Smart Bridge/Smart Bridge PRO through Radio Frequency (RF).
The Caseta Wireless in-wall switches, dimmers, and fan controls communicate with Lutron Radio Power Savr cccupancy and vacancy sensors in a standalone application. Sensors do not work with Smart Bridge or Smart Bridge PRO.
The Caseta Wireless in-wall switches, dimmers, and fan controls must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of Pico remote controls and Lutron Smart Bridge devices.

Pico remote controls and Radio Powr Savr occupancy sensors: up to 10 devices (total) may be paired to each Caseta Wireless in-wall switch/dimmer (with no Smart Bridge installed).
Smart Bridge or Smart Bridge PRO system: up to 75 total wireless devices (Caseta wireless dimmers / switches, Pico remote controls, and shades) are supported per system. Smart Bridge or Smart Bridge PRO counts as one device.

Ambient operating temperature: 32 F to 104 F (0 C to 40 C), 0% to 90% humidity, non-condensing. Indoor use only.
PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-10NXD can be used with mechanical switch in 3-way applications

Product highlights: