JessEm Rout-R-Lift II Router Lift w/3.5" Diameter Motors with Fitfinder Bundle

JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers w/ 3.5" Diameter Motors

The JessEm Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price, we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5'' diameter motors.

JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers w/ 3.5" Diameter Motors

The JessEm Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price, we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.

Double-Sealed Ball Bearing Construction

Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.

Bearing the Tension of the Lift

The shafts on the Rout-R-Lift II, like all the Router Lifts, are pressed into a shaft mount with hydraulic pressure. The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

Sturdy Construction

All the machined components on the Rout-R-Lift II are CNC machined for durability.

No Bent Wrenches

The bits can be easily changed from above the table without the need for bent wrenches.

Microjig 3/4-Inch Fitfinder Lock Miter Bit with 1/2 Inch shank Center Index and Router Table Setup

Take the guesswork out of setting up lock miter joints with the Microjig Fitfinder Lock Miter Bit, a patent pending Center Finding Shelf!

Fast and Precise Lock Miter Joints

Consistently well-fitted lock miter joints quickly and easily. The lock miter joint cannot be beaten for making columns, newels, posts, and cabinet scribes, but the bit and stock have to be exactly centered together. Only Microjig’s Lock Miter Bit features the Center Finding Platform milled into the bit body at the precise center of the cutting profile. A solid measuring point to set the correct bit height the first time.

Adjust for Perfect Fit

Once the height is correct, only the fence needs to be adjusted to perfect the fit. This greatly simplifies the router table setup for perfect joints with minimal test cuts and wasted stock. Now you can confidently add this important piece of joinery to any of your projects.

MicroJig Fitfinder 1/2 Gauge

The Fitfinder 1/2 Gauge allows you to find the 1/2 thickness of any material up to 3-inch thick. Create perfectly fitting joints with zero guesswork, set fences, and transfer cutting depths instantly all with no math or measuring.

No Math or Measuring Required

The Fitfinder 1/2 Gauge automatically finds the center of your workpiece using simple geometry. Lock the measurement in place and set the cutting depth of your saw blade/router bit, or set fences. Place material under P2, then lower P2 so that it rests on top of the material. The bottom of P3 automatically adjusts to exactly 1/2 the thickness of the material. Lock in the measurement and use the Fitfinder to set cutting depths and fences.

Set Fences For Resawing

Set fence position and resaw material on the bandsaw with zero guesswork.

Center Stock On The Lathe

Find the center of stock and mount material on the lathe for safer spindle turning.

Set Precise Cutting Depths

Lock in the measurement and transfer to the router or table saw to set the cutting depth for flawless lap joints.

Center Router Bits

Quickly and accurately find the halfway point of material.

MicroJig Grr-ripper2 Go Push Block with Kickback Prevention and Sticker for Fence Scale

The MicroJig Grr-ripper2 Go Push Block is the latest addition to MicroJig’s top-notch line of push blocks. Its revolutionary Kickback Prevention features make it a coveted item amongst its loyal users.

Table Saws and Grr-ripper2 Go Hand in Hand

The Grr-ripper2 Go eliminates the risk of accidental injuries substantially. Its kickback prevention feature and remarkable grip let you take control of the workpiece, thereby reducing the chances of slippage.

Prioritizes Safety and Delivers Accurate Results

With the Grr-ripper2 Go you can easily make thin, precise cuts. Its leg has a minimum cutting width of just 5/16 inch. The extreme grip lets you deliver accurate results in a safe manner. The elimination of barehand feeding reduces the chances of kickbacks.

Versatile Piece

This push block is extremely versatile and provides an equally excellent grip on wood, plastics, and aluminum.

Pre-Assembled and User-Friendly Setup

The Grr-ripper2 Go needs no assembly. It comes with a sticker for your fence scale that is easy to use. You can match the color from the fence scale to the end of the push block to keep the blade placed correctly. This further makes it user-friendly to be used by anyone.

No More Kickback Injuries

The Grr-ripper2 Go eliminates kickback by keeping the wood straight. This way the saw blade does not catch it thereby reducing the risk of accidental injuries.

Multipurpose Push Block

It is a multipurpose piece of push block that can be used at job sites or even at a home-setup shop.