Product highlights:
- Allows you to find the 1/2 thickness of any material
- Compatibility with any material up to 3 inch thick
- Create perfectly fitting joints with zero guesswork
- Uses simple geometry
- Can be used to set fence position and resaw material
MicroJig Fitfinder 1/2 Gauge
The Fitfinder 1/2 Gauge allows you to find the 1/2 thickness of any material up to 3-inch thick. Create perfectly fitting joints with zero guesswork, set fences, and transfer cutting depths instantly all with no math or measuring.
No Math or Measuring Required
The Fitfinder 1/2 Gauge automatically finds the center of your workpiece using simple geometry. Lock the measurement in place and set the cutting depth of your saw blade/router bit, or set fences. Place material under P2, then lower P2 so that it rests on top of the material. The bottom of P3 automatically adjusts to exactly 1/2 the thickness of the material. Lock in the measurement and use the Fitfinder to set cutting depths and fences.
Set Fences For Resawing
Set fence position and resaw material on the bandsaw with zero guesswork.
Center Stock On The Lathe
Find the center of stock and mount material on the lathe for safer spindle turning.
Set Precise Cutting Depths
Lock in the measurement and transfer to the router or table saw to set the cutting depth for flawless lap joints.
Center Router Bits
Quickly and accurately find the halfway point of material.
Prop 65 warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Learn More