Product highlights:
Kreg Concealed Hinge Jig
- Accurate hinge positioning with built-in indexing tabs
- Repeatable results with built-in measuring scales
Kreg Cabinet Hardware Jig
- Adjustable guides for accurate hole placement
- Built-in measuring scales for repeatable results
Kreg Drawer Slide Jig
- Accurate slide positioning with built-in indexing tabs
Kreg Classic 2-Inch Face Clamp
- 2-inch reach; clamps materials up to 21/4-inch thick
In the box
Kreg Concealed Hinge Jig
- Kreg Concealed Hinge Jig
- Jig Base with Index Cams
- Drill Guide
- 35mm Carbide-Tipped Drill Bit
- Stop Collar with Hex Wrench
- Owner's Manual
Kreg Drawer Slide Jig
- Kreg Drawer Slide Jig
- 2 x Brackets
- 4 x Upper/Lower Sliders (Installed)
- Owner's Manual
Kreg Cabinet Hardware Jig
- Kreg Cabinet Hardware Jig
- Jig Base
- Edge Guide
- 2 x Drill Guides with Knurled Nuts
- 2 x Non-Slip pads
- 2 x T-Knobs and Bolts
- Owner's Manual
Kreg Classic 2-Inch Face Clamp
Kreg Concealed Hinge Jig
The Kreg Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges by ensuring accurate hinge alignment, so you can install doors that fit great and work well. This economical, simple-to-use jig ensures accurate alignment of hinges, ensuring that you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped drill bit. This is a valuable piece to add to your collection of Kreg tools.
Easy to Use
The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called Euro hinges or European hinges) using just a drill. The door hinge jig positions an included carbide-tipped bit exactly at the proper position and offset, and it drills to the ideal depth every time thanks to a depth stop collar. This Euro hinge jig is intuitive to use, and it ensures that you can mount cabinet doors that fit well and work properly.
Perfect for Mounting
Concealed hinges are great for mounting cabinet doors because they stay out of sight, they're adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes and allows you to do it with nothing more than a drill and the carbide-tipped hinge drill bit that comes with the Kreg jig. An optional 1/16-inch bit is required to drill for hinge-mounting screws.
High-Quality Construction
The Kreg Hinge Jig consists of a glass-filled nylon base with a hole for inserting a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset - which is dictated by each hinge - and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results.
Reliable and Consistent
The Concealed Hinge Jig is designed to be easy for beginners to use but robust enough for professionals. Just pick out your hinges, look up a few basic mounting instructions that come with them, and then set up the hinge jig by adjusting a pair of built-in cams. After that, you're set to drill hinge cup holes using any ordinary drill. Whether you're installing one cabinet door or making doors for an entire kitchen, the Concealed Hinge Jig provides reliable, consistent results.
Kreg Drawer Slide Jig
The Kreg Drawer Slide Jig takes the guesswork out of installing drawer slides, enabling DIY drawer slide installation. This easy-to-use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time. The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. This Kreg drawer slide mounting tool is simple to use, and it ensures that every drawer fits right and operates smoothly.
Takes the Guesswork Out of the Process
Whether you're updating cabinets or you're building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won't operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
Smooth Positioning
The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
Incudes Two Brackets
The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. This slide tool works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides.
Easy to Use
Like other Kreg tools, this DIY drawer slide jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you'll use, a clamp, and the Drawer Slide Jig, and you're set to install drawer slides just like the pros. Whether you're installing one drawer or dozens, the Drawer Slide Jig provides fast, consistent results.
Kreg Cabinet Hardware Jig
The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. This cabinet or cupboard door handle jig is perfect for new construction and for refreshing entire rooms.
Takes the Guesswork Out of the Process
Whether you're updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps - and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. This cabinet handle jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you'll know that every piece of hardware is positioned correctly and consistently. Updating or building cabinets with a Kreg jig is simple.
Smooth Positioning
The Cabinet Hardware Jig features movable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A movable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.
Easy to Use
The Kreg Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16-inch bit (sold separately), and the ability to set the cabinet door handle jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you'll get straight, accurate holes - whether you're drilling one, a few, or hundreds.
Kreg Classic 2-Inch Face Clamp
The Kreg Classic 2-Inch Face Clamp is a great face clamp for Kreg joinery and more. This easy-to-use, compact clamp fits easily into tight spaces. It features a 2-inch reach and clamps materials up to 2-1/4-inch thick.
Large Clamp Pads
Classic Face Clamp is designed for creating perfectly flush Kreg Joints, and it works great for lots of other shop and project tasks that require solid clamping without marring. This clamp features large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the show side of the joint.
Compatibility
This Classic Kreg Face Clamp with 2-inch reach and clamps materials that are up to 2-1/4 inches thick. It has a simple screw that adjusts the clamp to match material thickness, plus comfortable padded handles. You can use it with a Kreg Jig Pocket Hole System and is compatible with the Kreg Jig R3's Clamp Pad Adapter.
Prop 65 warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Learn More