Product highlights:
- 3-Directional Force for total control of the workpiece
- Moving-Blade-Guard Hand protection
- Precise 1/4" thin rips
- Virtually eliminates kickback
- Work with small stock safely
In the box
Microjig Grr-Ripper 3D Pushblock
- Microjig GRR-RIPPER 3D Pushblock
- Main Body
- 1/2-Inch Leg
- 1/4-Inch Leg
- Center Leg
- Handle
- Balance Support
- Hardware
Microjig GRR-Ripper Gravity Heel Accessory Kit
- Microjig GRR-Ripper Gravity Heel Accessory Kit
- 5 x Heels
- 2 x Heel Spacers
Microjig Grr-Ripper 3D Pushblock
The Microjig GRR-Ripper 3D Pushblock is helping you work smarter and safer. With three directions of force you will achieve superior precision, control, and safety. The Grr-Ripper is equipped with Green-Grip technology for superior gripping power over a wide variety of materials including oak, cherry, walnut, ebony, pine, poplar, maple, plastics, and aluminum. The Microjig 3D pushblock acts as a Moving-Blade-Guard for total hand protection while cutting. After trying the Microjig Grr-Ripper 3D Pushblock, you’ll never use a table saw without it.
Precision Control
The Microjig GRR-Ripper 3D Pushblock features three directions of force for ultimate precision and control. Downward mode virtually eliminates any kickback. Inward mode keeps the stock firmly against the fence. Forward mode controls and feeds both sides of the stock so you can achieve cleaner cuts.
Gripping Power
The Microjig Grr-Ripper is equipped with Green-Grip non-slip material for superior gripping power. Conquer materials such as oak, cherry, walnut, ebony, pine, polar, maple, plastics, and aluminum. The treaded grooves provide increased traction even when dealing with sawdust.
Safer
With the Grr-Ripper precision, control, and safety have never been so smart. The Microjig Grr-Ripper Pushblock acts as a Moving-Blade-Guard to protect your hand from dangerous cuts. You’ll have total control over the keeper piece thanks to the ¼” leg. With balance support, your small and narrow workpieces with be stabilized. The 3D pushblock is fully adjustable to give you unlimited possibilities for uses.
Versatility
The Microjig pushblock can be used with table saws, bandsaws, router tables, jointers, and more for extreme versatility. You can flip the GRR-RIPPER in the vertical position for resawing and veneers while ensuring a straight cut from beginning to end. You’ll have unparalleled control with safe and smart freehand and edge routing.
Microjig GRR-Ripper Gravity Heel Accessory Kit
The new Gravity Heel Kit for Micro Jig's GRR-Ripper (item: MJG-200) works so well you'd think it ran on batteries. This device allows a seamless transition for your GRR-Ripper from flat pushing block to a rear-pressure pushing stick when working at the table saw, router table, bandsaw or the jointer. The heel drops into place when you need it, then lifts away when you don't. Fully adjustable from 0-1-inch, this gravity operated heel accessory has been designed to double as a sacrificial component to your GRR-Ripper if you so need, so feel free to use it as a backing block when cutting end grain joints to prevent tear-out. The new Gravity Heel virtually eliminates tear-out and increases control and stability when feeding short or long stock on the table saw. It provides a secure backing on routing operations preventing blowout and can also be used as a template for repeat routing. The Gravity Heel is perfect for use with long stock on jointers. The Gravity Heel is there when you need it and gets out of the way when you don't.
Prop 65 warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Learn More