Product highlights:
- Guide rollers are mounted at 5-degree angle
- Guides offer 3-1/8" of total vertical travel
- CNC-machined anodized aluminum guides
- Wear-resistant acetal resin rollers
- Roller axels are machined from cold rolled steel
- Traction tires are molded out of urethane
In the box
JessEm Clear-Cut TS Stock Guides
- JessEm Clear-Cut TS Stock Guides
- 2 x Stock Guides
- 30 inch Track
- 8 x #10 Self Tapping Screws
- 4 x 1/4-20 x 1/2 inch Low Head Cap Screws
- 4 x 1/4-20 Square Nuts
- T-25 Torx Screwdriver
- 1/8 inch Hex Key
- #19 Drill Bit
- Limited 1-Year Warranty
JessEm Clear-Cut TS Stock Guides
The JessEm Clear-Cut TS Stock Guides for your table saw offer superior control on your workpiece by securely holding it in position to achieve safer, smoother, and more precise cuts. The unique guide rollers mounted on a 5-degree angle effectively steering your stock towards your fence. This angle causes the roller to hold with more force if the wood tries to move against the direction of the feed. Under spring pressure, the roller arms ensure your work is held firmly in place. Rollers are fitted with one way roller bearings to ensure each roller spins in the direction of the feed to prevent kickback.
Fast and Easy Set Up
The guides lock into position along the track with a twist of the anodized aluminum clamping knobs. Grip force urethane rollers hold your stock securely in position. When not in use they tuck away in behind the surface of your fence.
Perfect for Boards or Large Panels
The guides have 3-1/8" of total vertical travel and can accommodate a maximum stock thickness of 13/16" above the mounting surface when mounted to the T-track. The Clear-Cut TS Guides give you complete control of your stock even when routing wide boards or large panels. The dual action of the guides will pull your work tight to the fence.
Material and Construction
The guides are CNC-machined from 6000 series aluminum and anodized for appearance and durability. The roller axels are machined from cold rolled steel and case hardened for durability, while rollers are designed from wear-resistant acetal resin. Traction tires are molded out of urethane for long life and superior grip.
Ratings and reviews
