Fuji Spray Q5 Platinum T75G Quiet HVLP Spray System Bundle

Fuji Spray Q5 Platinum T75G Quiet HVLP Spray System

For the best spray experience fine-finishing painting projects use Fuji Spray Q5 Platinum T75G Quiet HVLP Spray System. Considered the quietest operating turbine on the market today, the Q Platinum Series is the ultimate tool in terms of power and control allowing you to focus on what really matters - the quality of your work. The patented noise reduction technology coupled with the unique Heat Dissipation Chamber makes the Q-Series stand out in the industry. The Q5 Platinum Series features maximum psi/cfm adjustment for perfect coating atomization and overspray reduction.

Q is for Quiet

While standard turbines may cause hearing loss over period of time, the Fiji Spray has reduced the turbine noise levels by over 50 percent. In fact, the Fuji Spray Quiet turbines are so quiet that the low hiss of air passing through the spray gun when the trigger is engaged is more noticeable than the turbine.

Heat Dissipation Chamber

Fuji Spray has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation Chamber located at the rear of the case. Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris. The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.

Fugi T75G

The included Fuji T-75G Non-bleed Spray Gun with Pattern Control Knob features an adjustable fan that can be set from small to large and everything in between. Air passes through the spray gun only when the trigger is pulled which means there is less paint buildup on the tip of the fluid nozzle. This helps to achieve professional finish results.

Fuji Spray Air Cap Set #2 for T-Series Spray Gun

Whether you paint for pleasure or work Fuji Spray has all the tools and accessories needed to get the job done right. Use Fuji Spray Air Cap Set #2 with the T-Series Spray Gun designed for application of automotive enamels, airplane and marine finishes. Nitrocellulose lacquers, sealers, cellulose, acrylics, synthetics, polyurethanes, stains and varnishes can also be used with this 1.0 mm output set.

*Note: This set is intended for the T-Series Fuji Spray guns only.

Fuji Spray Air Cap Set #4 for T-Series Spray Gun

Whether you paint for pleasure or work Fuji Spray has all the tools and accessories needed to get the job done right. Use Fuji Spray Air Cap Set #4 with T-Series Spray Gun designed for application of automotive enamels, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnishes, urethanes, enamels and oilbased paints can also be used with this 1.5mm output set. Though similar to the #3 set, this 1.5mm nozzle requires less paint medium thinning.

*Note: This set is intended for the T-Series Fuji Spray guns only.

Fuji Spray Air Cap Set #5 for T-Series Spray Gun

Whether you paint for pleasure or work Fuji Spray has all the tools and accessories needed to get the job done right. Use Fuji Spray Air Cap Set #5 for T-Series Spray Gun for working on larger surfaces and applying thicker layers. Catalyzed lacquers, primers, varnishes, urethanes, enamels, industrial coatings (higher viscosity), sealers, polyurethanes, oil based paints, epoxy enamels, plastics, adhesives, floor paving paints, latex, splatter paints and multi-fleck paints can also be used with this 1.8mm output set.

*Note: This set is intended for the T-Series Fuji Spray guns only.

Fuji Spray Air Cap Set #6 for T-Series Spray Gun

Whether you paint for pleasure or work Fuji Spray has all the tools and accessories needed to get the job done right. Use Fuji Spray Air Cap Set #6 with T-Series Spray Gun for working on larger surfaces and applying thicker layers. This 2.0 mm is great for catalyzed lacquers, primers, varnishes, urethanes, enamels, industrial coatings (higher viscosity), sealers, polyurethanes, oil-based paints, epoxy enamels, plastics, adhesives, floor paving paints, latex, splatter paints and multi-fleck paints. Similar to the 1.8mm Fuji Spray air cap, the # 6 set offers even more coverage.

*Note: This set is intended for the T-Series Fuji Spray guns only.

Fuji Spray Air Cap Carrying Case

Store and carry the Fuji Spray gun caps and needles inside the convenient and protective Fuji Spray Air Cap Carrying Case. This slim and lightweight toolbox provides place for up to four air cap sets. Bring it along to the next painting job and you won't have to worry for safety of your tool accessories. The everyday tossle will not damage the spray gun air caps and needles, thanks to the protective foam insert.