Tools

Key features:

• Designed for sharpening small, detailed tools
• Ideal for woodcarving, dental devices, and gun designing
• Includes round, square, triangle, and slip (teardrop) shapes
• Comes in suede snap-close pouch
• Easy to clean with scouring pad and water

Key features:

• Wall charging unit
• Up to 44 mi of range added per hour
• 11.5 kW and 48 amp output
• Auto-sensing handle to open charge port
• Tesla app supported
• Wi-Fi connectivity
• Versatile indoor and outdoor design
• Power Management features
• 24-feet cable length

Key features:

• High-performance TiCo Hi-Density carbide
• Produces a remarkably clean, chip-free cut
• Ideal for crosscutting oak, pine, melamine, and veneer plywood
• Perma-SHIELD non-stick coating protects
• Super-thin laser-cut kerf for fast, durable, and clean cuts
• Tri-metal shock-resistant brazing to withstand extreme impact
• Hardened steel body for longer life
• Sharper cutting edge
• Comes in a pack of 2

Key features:

• Vacuum lifter with accessories
• Handles rough and highly porous materials
• LED digital display
• 20-volt battery
• SMART CUT foam seal
• User-friendly T-handle
• Compatible with GRABO suction plates

Key features:

• 9-inch round double-d coil
• Waterproof up to 5 meters (16 feet)
• Lightest MANTICORE coil
• Low profile for easy sweeping through water
• Weighs only 362g with skidplate

Key features:

• Protects against rust, corrosion, mold, and mildew
• Reusable and effective moisture-absorbing container
• Prevents damage from high humidity or excess moisture
• Works in tightly sealed, moisture-resistant container
• Suitable for protecting various sensitive articles

Key features:

• Adapts 40V max XGT chargers to charge 18V LXT batteries
• Charges 18V LXT Lithium-Ion 6.0Ah battery in only 40 minutes
• Charges 18V LXT Lithium-Ion 5.0Ah battery in only 40 minutes
• Charges 18V LXT Lithium-Ion 2.0Ah battery in only 24 minutes
• XGT Rapid Charger with dual-fan design circulates air
• XGT Rapid Charger’s digital display indicates charge level
• Digital communication within XGT actively monitors

Key features:

• Integrated LED battery charge level indicator monitor charge
• Reaches full charge in 30 minutes or less
• Compatible only with Star Protection tools
• Delivers consistent power and run time in extreme temperatures
• Equipped with Star Protection Computer Controls
• Impact-resistant outer case and shock-absorbing inner-liner
• 16 contact terminals maintain constant connection with tool
• Resists self-discharge and remains ready for use
• Makita technology delivers category-leading charge time

Key features:

• 50 percent more runtime and over 75 percent more power
• Bosch-exclusive CoolPack 2.0 Technology
• Two layers of enhanced 21700 cells
• Lightweight design
• Compatible with Bosch 18V chargers and AMPShare System
• Cutting-edge design
• Charge status indicator

Key features:

• Waterproof headphones
• Submersible in both fresh and saltwater
  
• Easy to wear over-the-ear
• Fully adjustable fit
• 3.5 mm jack
• Headphones with EQUINOX connector

Key features:

• 20V lithium-ion battery
• Works with 20V cordless power tools
• Works with GLRS20A Cordless Reciprocating saw
• Also works with GLCS2055A Cordless 20V circular saw
• Works with GLCD2038A Cordless drill
• Compatible with G20Max 20V cordless tools

Key features:

• Must-have tool for table saws
• Prevents kickback
• Provides superior control of parts
• Keeps fingers clear of the bits and blades
• SafeRip Kit prevents accidental blade contact
• Fully adjustable and adaptable
• Makes precision rip-cuts and small cuts

Key features:

• 15-degree coil siding nails 
• Thickcoat galvanized finish and Ring shank
• 2 ½-inch x 0.90 inch size
• 3600 nails per box
• For use in the Bostitch N66C-1 industrial siding nailer

Key features:

• 12-inch heavy-duty flathead fastener
• No pre-drilling required
• Easy to install
• ACQ-approved
• Black color provides a great finished look
• Comes as a pack of 250

Key features:

• For composite decking, wood decking and exterior trimming
• High marine grade 305 stainless steel finish
• Star Drive technology
• Sharp point with serrated threads reduces torque
• Requires no pre-drilling
• Available in a 1 lb box with approximately 130 pieces
• Screws of 8 x 2-1/2-inch size

Key features:

• Recessed star drive with 6 points of contact
• CEE thread to enlarge hole size
• W-Cut for low torque, smoother drive, reduced splitting
• Zip-Tip for no pre-drilling, faster penetration, reduced splitting
• Washer head for immense holding power
• Includes cutting pockets to provide a clean hole
• Includes case-hardened steel
• Climatek Coating that is AC257 code approved
• 5/16 by 4-inch fastener size

Key features:

• Plastic skidplate designed for Vanquish series detectors
• Easily connects to the underside of the coil
• Protects the search head from wear and tear
• Extends the life of the coil
• Features a smooth black finish

Key features:

• Compatible with Vanquish series detector
• Measures 12 by 9 inches
• Enhances your detection experience
• Waterproof coil for use in harsh environments
• Comes in a black finish

Key features:

• A perfect introduction to the world of metal detecting
• Collapses and conveniently folds to fit into backpacks
• Lightweight at just 2.2 pounds
• Features 2 find modes and 3 levels of sensitivity
• Large intuitive icons convey battery life, signal strength
• Large icon also shows the type of items being detected
• Requires 4 AA batteries to function
• Instant excitement for every camping trip or outdoor outing

Key features:

• Ideal for high-traffic areas or locations such as factories
• Strong, permanent acrylic adhesive backing
• Quick and easy installation on any smooth, clean surface
• Glows for eight hours
• Bold graphic letters make it easy to read

Key features:

• Plastic skidplate designed for Vanquish series detectors
• Easily connects to the underside of the coil
• Protects the search head from wear and tear
• Extends the life of the coil
• Features a smooth black finish

Key features:

• Metal detector carry bag
• Made with canvas material
• Available in black color
• lightweight, just 0.8lb
• Made for Minelab GO-FIND metal detectors

Key features:

• SOG PowerLock: EOD Multi-Tool with Compound Leverage
• Includes a Gripper, Wire Crimper, Saw, Blade, File and more
• Corrosion-Resistant 420 Stainless Steel
• Crimper produces non-flaring, high pullout strength crimps
• Enhanced Cutting Power with Compound Leverage
• Integrated EOD Crimper for High Pullout Strength Crimps
• Comes in a Black Oxide finish

Key features:

• Tracking Point tooth design delivers maximum life
• 5X longer life, 2X more durability, and increased stability
• Ideal for framers, roofers, remodelers, concrete formers
• Tracking Point doubles the carbide surface area
• Offers 30% more cuts per battery charge in cordless saws
• Features an enhanced anti-vibration design
• TiCo high-density carbide for maximum cutting life
• Blade features Perma-SHIELD non-stick coating
• Ideal for cordless applications